Spring is here and its arrival means warmer weather, more hours of daylight and spring break travel. As you set your clocks forward on March 11, and plan to check your smoke and carbon monoxide detectors, take a few steps to make sure your vehicle is safe and road-trip ready.
- Check that all interior and exterior lighting is working properly and replace worn wiper blades so you can see clearly when driving at night and during spring showers.
- Check the tires, including tire pressure and tread. Underinflated tires reduce a vehicle’s fuel economy and uneven wear indicates a need for wheel alignment. Tires should also be checked for bulges and bald spots.
- Check filters and fluids, including engine oil, power steering and brake and transmission, as well as windshield washer solvent and antifreeze/coolant. Dirty air filters can waste gas and cause the engine to lose power.
- Check the hoses and belts and replace if they become loose, cracked, brittle, frayed or show signs of excessive wear as they are critical to the proper functioning of the electrical, air conditioning, power steering and cooling systems.
- Check the brake system and make sure the battery connection is clean, tight and corrosion-free.
- Check if there is a defect in your vehicle on the National Highway Traffic Safety Administration (NHTSA) website at nhtsa.gov/recalls by using the VIN look-up too. Watch a step-by-step video on how to locate your VIN and find out more about how recalls work.